Download Print this page

Erato Verse User Manual

Red = Charging

Blue = Full Charged

Select your favorite song and give the VERSE earphones a try. If you feel

that the sound is lacking lows, please adjust the eartip to a size up and

adjust the fitment of the earphones in your ear.

PR EPAR E / CH AR G E

Remove plastic tag and

fully charge the VERSE

earphones.

Red = < 25% battery remaining

Blue = > 25% battery remaining

Ear canal

PA I R

Hold the button on the L earbud for 3 seconds until you see

the LED flashing red/blue and hear "POWER ON", then the

words "PAIRING".

Grab the device you want to pair with and turn on Bluetooth and open

the settings page and search for new Bluetooth connection.

Select "VERSE" to pair. Blue led flash every 3 seconds from the LED indicates

your pairing was successful.Once pairing is successful on the earphone, simply

power on the R earbud by holding the power button 1 second to turn on.

The 2nd earphone will automatically sync with the L earbud.

Table of Contents

Need help?

Do you have a question about the Verse and is the answer not in the manual?

Page 1 Blue = Full Charged Blue = > 25% battery remaining Select your favorite song and give the VERSE earphones a try. If you feel Grab the device you want to pair with and turn on Bluetooth and open that the sound is lacking lows, please adjust the eartip to a size up and the settings page and search for new Bluetooth connection.
Page 2 QUI C K ST A RT U SE Button Operations Rock the earbud side by side and remove from the charging case to automatically turn on the VERSE. Removing earbuds without rocking motion will keep earbuds Long Press (3 Sec) Long Press (1 Sec) R/L off until you turn them on by pressing the power button.