Table of Contents
Advertisement
DRIVE SAFETY CONTROL LEVER
Engage tines into forward, releasing returns machine to neutral.
BELT TENSION ADJUSTMENT
To increase belt tension:
DEPTH REGULATOR LEVER
Tilling depth is controlled by the height of the depth regulator lever.
Model 5521 Handlebar
CAUTION
THIS INFORMATION IS PROVIDED HERE ONLY TO
INTRODUCE THE CONTROLS. DO NOT START THE
ENGINE AT THIS TIME. STARTING AND OPERATING
INSTRUCTIONS ARE GIVEN ON PAGE 10. PLEASE
READ THIS SECTION AND ALL OPERATING AND
SAFETY INSTRUCTIONS BEFORE STARTING YOUR
TILLER.
AS A SAFETY PRECAUTION, THE DRIVE SAFETY
CONTROL LEVER WILL NOT LOCK IN THE
FORWARD POSITION.
TO STOP THE WHEELS AND TINES AT ANY TIME
RELEASE THE DRIVE SAFETY CONTROL LE-
VER.
WARNING
ENGINE SHOULD BE OFF BEFORE ADJUSTING
ANY CONTROLS.
DO NOT ADJUST TILLING DEPTH UNLESS DRIVE
SAFETY CONTROL LEVER IS RELEASED TO THE
NEUTRAL POSITION.
Advertisement
Table of Contents
