Advertisement
Step 4: In the "Setup Ethernet Device" dialog box, select the "DHCP",
"Static IP" or "Runtime Setting" (e.g., DHCP) in the "IP Address Assignment Method"
field.
Notes:
1. When using "Static IP" or "DHCP", the IP settings are stored as a part of the
program image, and only successful downloading can update the IP settings.
2. When using "Runtime Setting", the program image has no information about the IP
settings, and TouchPAD loads the IP information from the flash at the runtime.
Before IP settings are used, be sure to set the IP settings into the flash by the
related API functions. We have demo to do this as well.
TPD-283-H 2.8" TouchPAD - QuickStart (Dec/2017)
ICP DAS USA, Inc. |
www.icpdas-usa.com
| 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
7
Advertisement
