SAFETY INSTRUCTIONS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. CONTACT DIGITAL AUDIO LABS FOR SERVICING. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated and/or potentially dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CONTENTS SAFETY INSTRUCTIONS ..................II IMPORTANT SAFETY INSTRUCTIONS ............ II CARE ....................... II DIGITAL AUDIO LABS LIMITED WARRANTY ............1 REPAIR POLICY ..................1 WARRANTY SERVICE ................1 NON-WARRANTY SERVICE ..............1 CONTENTS OF BOX .................... 2 INTRODUCTION ....................2 ANATOMY OF THE MIX-16/32 ...............
Digital Audio Labs warrants their products against defects in material and workmanship for a period of two years from date of purchase. During this period, Digital Audio Labs will, at its option, repair the defective unit or replace it with a new or rebuilt one.
16/32. This will be unused if using the Dante Option Card. 3. POWER SWITCH: This switch turns power on/off to the MIX-16/32 unit. The MIX-16/32 supplies power to connected Livemix personal mixers. Turning the power on/off will also power on/off all connected personal mixers. LIVEMIX MIX-16/32...
Page 6
8. LIVEMIX DATA OUT 1: This port is intended to connect to future Livemix products, it is currently inactive. 9. LIVEMIX DATA OUT 2 (MIX-32 ONLY): This port is intended to connect to future Livemix products, it is currently inactive. LIVEMIX MIX-16/32...
ME & GROUP ME & GROUP ME & GROUP ME & GROUP ME & GROUP ME & GROUP MIX-16 CAT5/CAT6 LIVEMIX MIX-16/32 PUSH TO SETUP PUSH TO SETUP MASTER OUT MASTER OUT PUSH TO SETUP PUSH TO SETUP PUSH TO SETUP...
ME & GROUP ME & GROUP ME & GROUP ME & GROUP ME & GROUP ME & GROUP * MIX-16 pictured MIX B OUT CS PORT FOOTSWITCH MIX A OUT MIX A HEADPHONES AUX IN MIX B HEADPHONES LIVEMIX MIX-16/32...
MIX-16/32 USB record port?” Press “Yes” to assign or “No” to cancel The selected stereo mix will be sent to the USB port of the MIX-16/32. Connect to a Windows PC or Apple computer and record the stereo signal with recording software. LIVEMIX MIX-16/32...
MIX-16/32 or you may it works best to have only the damage the unit. CS-DUO you are using to update connected to the system. If updating with the CS-DUO does not work, please use the PC Application. LIVEMIX MIX-16/32...
CAT5/CAT6 cable to one of the ports of the MIX-16/32. Using various controls on the unit, two users can each create their own custom mix, which is then output to headphones, in-ear monitors or stage monitors, right from the CS-DUO unit. LIVEMIX MIX-16/32...
Dante network, make sure that your console or Dante device is set to be the master and Livemix is set to slave. This can be done through the Dante controller on a Windows PC or Apple computer. LIVEMIX MIX-16/32...
OPEN SOURCE STATEMENT The Livemix MIX-16/32 firmware includes the open source software module FreeRTOS, which is licensed under the terms of the GNU General Public License (version 2) AND MODIFIED BY the FreeRTOS exception, as outlined in the FreeRTOS license. In accordance with those licensing terms, we must provide you the source code for the version of FreeRTOS used in the MIX-16/32.
Need help?
Do you have a question about the Livemix MIX-16 and is the answer not in the manual?
Questions and answers