Advertisement
level ground or stand and make sure it's stable without inclination. If it inclines, it may fall on the
ground, smartlamp body or the floor may be damaged.
Please don't overexert to push smartlamp body. If overexert to push smartlamp body, it
may fall down to cause smartlamp body and even the floor be damaged.
Power cable of smartlamp body
Don't plug/unplug the power cord with wet hands. If power cord or the plug is worn out or
damaged, please do not use it.
Controller Operation
Operation IGOO controller
IGOO controller contains sensitive components. Do not drop, disassemble, bake with microwave
oven, incinerate, paint, or insert foreign object into the IGOO controller. Do not use IGOO
controller if it has been damaged, such ascracked, punctured, or damaged by water.
Both sides of IGOO controller are made of glass materials. The glass could break if the
controller is dropped on a hard surface or receives a substantial impact or is crushed, bent or
deformed. If the glass chips or cracks, do not touch or attempt to remove the broken glass. Stop
using the controller until the glass is replaced by IGOO or an IGOO Authorized Service Provider.
Keep IGOO controller surface clean.
Clean the controller immediately if it contacts with any contaminant that may cause stains, such
as ink, dyes, makeup, food and oils. To clean the controller, unplug all cables and turn off the
controller (press "Power On/OFF button" and then click "Ok"). Then use a soft, slightly damp and
lint-free cloth to clean it. Avoid getting moisture in openings. Don't use windows cleaners,
household cleaners, aerosol sprays, solvents, alcohol, ammonia or abrasives to clean the
controller.
Avoid to place the smartlamp into water or moist environment. Do not use the controller in rain,
or near washbasins or other wet locations. Take care not to spill any food or liquid on the
controller. In case the controller gets wet, unplug all cables, turn off the controller before
cleaning, and allow it to dry thoroughly before turning it on again. Do not attempt to dry the
controller with an external heat source, such as a microwave oven or hair dryer. Damage to the
controller caused by contact with liquid is not covered under the warranty.
Repairing IGOO
Never attempt to repair or modify IGOO yourself. IGOO doesn't contain any user-serviceable part.
Dismantling IGOO may cause damage and this sort of damage is not covered under warranty. If
the controller is leaked into water, punctured or strongly hit on hard surface, please stop using it
before sending it to an IGOO Authorized Service Provider.
Do not attempt to replace the rechargeable battery in IGOO controller
Replacing the battery
yourself. The battery may only be replaced by IGOO or an IGOO Authorized Service Provider. For
more information about battery replacement service.
Advertisement
