IGOO Smartlamp User Manual

This operation instruction includes information on safety, operation supervision and warranty.
To avoid getting harmed, please read all the operation instructions and safety information
below before using IGOO.
IGOO smartlamp mainly includes a smartlamp body, a controller, a controller power adapter and
USB cable.
Smartlamp body input: 100-240V～50/60Hz 3.0A(Max) 100W
Smart control Adaptor input: 100-240V～50/60Hz 0.3A
After the laboratory measurement for the controller the Max SAR value is 0.738W/kg and meets
applicable limits for radio frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the
rate at which the body absorbs RF energy. The SAR limit is 1.6 watts per kilogram in countries
that set the limit averaged over 1 gram of tissue and 2.0 watts per kilogram in countries that set
the limit averaged over 10 grams of tissue. During testing, product radios are set to their highest
transmission levels and placed in positions that simulate use near the body, with 5mm
separation.
First connect the power plug of the smartlamp body with AC power (100V-240V), the smartlamp
body will start up automatically. Press the power button on the controller for 3 seconds, the
controller will start up. The controller will connect to the smartlamp body automatically, which
can be controlled by the controller after connection.
Important Safety and Operation Information
Warning: Failure to follow these safety instructions could result in fire, electric shock, or other
injuries or damages to IGOO or other properties.
The USB port is just used to charge and can't used to transmit data
Smartlamp Body Operation
Avoid to place the smartlamp into water or moist environment. IGOO smartlamp is used
indoors and without waterproof performance. Therefore, please don't place the body outdoors
or in the rain. There are electronic devices at the bottom of smartlamp body, so please don't
place it in water or moist environment. Please don't pour water in the mouth on the top of
smartlamp body.
Avoid covering the head. When smartlamp is in use, the head will normally generate heat.
Make sure it's well ventilated around the smartlamp body, and don't cover the smartlamp body
with things like clothes.
Place the smartlamp body at stable and level locations. Please place smartlamp body on
IGOO Smartlamp User Manual