Air Bag Inflation Conditions - Hyundai Santro Owner's Manual

WARNING
•
Do not hit or allow any objects to
impact the locations where air
bags or sensors are installed.
This may cause unexpected air
bag deployment, which could
result in serious personal injury
or death.
•
If the installation location or
angle of the sensors is altered in
any way, the air bags may
deploy when they should not or
they may not deploy when they
should, causing severe injury or
death.
Therefore, do not try to perform
maintenance on or around the
air bag sensors. We recommend
that the system be serviced by an
authorized HYUNDAI dealer.
•
Problems may arise if the sen-
sor installation angles
changed due to the deformation
of the front bumper and body.
We recommend that the system
be serviced by an authorized
HYUNDAI dealer.
•
Your vehicle has been designed
to absorb impact and deploy the
air bag(s) in certain collisions.
Installing aftermarket bumper
guards or replacing a bumper
with non-genuine parts may
adversely affect your vehicles
collision and air bag deployment
performance.
are
A A ir bag inflation conditions
Front air bags
Front air bags are designed to inflate
in certain frontal collision depending
on the crash severity of the front col-
lision.
If the vehicle chassis is impacted by
bumps or objects on unimproved
roads or sidewalks, air bags may
deploy. Drive carefully on unim-
proved roads or on surfaces not
designed for vehicle traffic to prevent
unintended air bag deployment.
OAH2038016