Operating The Bt Hs 112 - Blaupunkt BT HS 112 Manual

Operating the BT HS 112

Making a call
– Voice dialling*
To activate voice dialling, briefl y press the MF button. You hear several
signal tones. After the signal tone, speak the voice command. After the
voice command has been recognized, the cell phone dials the number
associated with it.
Note: If two cell phones are connected with the BT HS 112, the voice com-
mands are directed only to the cell phone connected fi rst.
– Redialling the last number*
Press the MF button twice. You hear a signal tone and the number dialled
last is being redialled.
Note: If two cell phones are connected with the BT HS 112, hold the
"–" volume button pressed for 2 seconds to dial the last number of the
cell phone connected last.
– Call origination via cell phone
Select the desired number as usual via the cell phone. The call is automati-
cally transferred to the BT HS 112.
Answering a call
To answer an incoming call, briefl y press the MF button.
Ending a call
Briefl y press the MF button to end a call.
Rejecting a call*
To reject a call, hold the MF button pressed until you hear a signal tone.
Adjusting the volume
Adjust the call volume with the buttons "+" and "–". You hear a signal tone
once the minimum or maximum volume has been reached.
Warning: Always listen at a moderate volume to protect your hearing.
Muting the microphone
To mute the microphone during a call, press the "–" volume button for
3 seconds. The LED display fl ashes red every 10 seconds and you hear two
signal tones. Press the "–" volume button again for 3 seconds to cancel mute.
22
02_BTHS112_gb.indd 22-23 02_BTHS112_gb.indd 22-23
Transferring a call
To transfer a call from the headset to the cell phone, press the volume but-
tons "+" and "–" at the same time. Repeat the step to transfer the call back
to the headset.
Note: With some cell phones, the connection is disconnected if you transfer
the call to the cell phone. To transfer the call back to the headset, you have to
press the MF button instead of the volume buttons "+" and "–".
Managing calls*
You can answer and manage two calls on one of the connected cell phones
via the BT HS 112.
Note: You do not have the option of managing several calls from two con-
nected cell phones at the same time. When you receive a call on one cell
phone while a call is active on the other cell phone, the active call is being
ended when you answer the incoming call by briefl y pressing the MF button.
You receive a call during an active call
Hold the active call and answer the Press the MF button for 2 seconds.
incoming call.
End the active call and answer the Briefl y press the MF button.
incoming call.
Continue the active call and reject Press the MF button twice.
the incoming call.
You are conducting two calls, an active one and one on hold
Change between the active call Press the MF button for 2 seconds.
and the one on hold.
End the active call and answer the Briefl y press the MF button.
call on hold.
Continue the active call and end Press the MF button twice.
the call on hold.
Continue the active call and answer Briefl y press the "+" button.
the call on hold.
* The cell phone must support this function. You fi nd the pertinent information
in the operating instructions of the cell phone.
23
04.05.12 12:31 04.05.12 12:31