IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
Page 3
Cleaning The unit should be cleaned only as recommended. See the section « Care and Maintenance » of this manual for cleaning instructions. Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. To reduce the risk of fire or electric shock, do not expose this ...
LOCATION OF CONTROLS Front View Back View Bottom View...
Page 6
1. Built-in Microphone 2. -Button In Bluetooth mode : Press this button to adjust volume level down during Bluetooth mode . In TF card Playback mode : Press and hold this button to adjust volume level down. Short press this button once to return to the beginning of ...
6. Operating mode indicator (Red/Blue/Purple) Blue color =Bluetooth mode Purple color= TF card playback mode Red=Aux-in mode 7. TF card slot 8. Mini USB Charging jack 9. Aux-In Jack 10.Power On/Off selector BATTERY CHARGING INSTRUCTION This unit operates on a built-in Li-ion battery that can be recharged either using the USB port on your computer or from a USB power adaptor (not included) with a rated output of DC 5V 500mA and up (upto 1.5A).
RECHARGING THE INTERNAL BATTERY After prolonged use, the internal battery will become weak and the operation may become intermittent. When the internal battery capacity is very low, the battery Indicator will rapidly flash in red to alert you to recharge the internal battery as soon as possible.
Page 9
Use only chargers rated for Li-ion cells. Be sure the charger's voltage and current settings are correct for the battery pack being charged. Charge batteries on a fireproof surface and away from flammable items or liquids. Batteries should NEVER be left unattended while charging.
Page 10
OPERATING THE SPEAKER IN BLUETOOTH MODE Bluetooth involves a technology for wireless radio connection of devices over a short distance. Devices with Bluetooth standard are transmitting between 2.402 and 2.480 GHz in the ISM band (Industrial, Scientific and Medical). Interference can be caused, for example by WLAN-networks, DAB radios, cordless phones, or microwave ovens which work on the same frequency band.
Page 11
1. When the speaker turned on, the Operating mode Indicator flashes in blue . The speaker is ready to pair (link) with your Bluetooth device . 2. Activate Bluetooth on the compatible device, and set it to search for compatible devices. 3.
Page 12
3. Press the + / - button on the speaker to adjust to the desired volume level . Using The Speaker as a Handfree Bluetooth Speakerphone 1. Link your cell phone to the speaker via Bluetooth as described above . 2.
Page 13
-Press and hold the “+” or “-” button to raise up/lower the volume level. Short Press “+” button to skip to next track or press “-” button to the previous track. To remove your TF card, simply pause the playback and ...
(included)is not plugged USB cable (included) into the mini USB jack into the mini USB on the bottom of the jack on the MW-1308 MW-1308 No Charging Plug another device Wall outlet into the same outlet functioning.
Page 15
NO Sound The MW-1308 battery is Recharge dead. MW-1308 battery. Go through “Speaker The MW-1308 is not linked with cell Operations” process phone. to link the speaker. Increase the volume Volume set too low. of your device. Check whether connection exists. If...
SPECIFICATIONS Battery capacity (included): 700 mAH Charging Voltage: DC 5V, 500Ma and up. (upto 1.5A) Max Play Time: 3 Hours Working Temperature: -5℃~+ 40℃ Working Humidity: 20%~80% The right to make technical and design modifications in the course of Continuous product development remains reserved. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with...
Page 17
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:...
Need help?
Do you have a question about the MW-1308 and is the answer not in the manual?
Questions and answers