IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
Page 3
Cleaning The unit should be cleaned only as recommended. See the section « Care and Maintenance » of this manual for cleaning instructions. Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. To reduce the risk of fire or electric shock, do not expose this ...
LOCATION OF CONTROLS Flashlight on/off switch .Press and hold this button for 3 seconds to turn on/off the torch light. .When the torch light is off, short press and release this button repeatedly to enter strobe mode 2. -Button In Bluetooth or USB Playback mode, press this button once ...
Page 6
3. Built-in Microphone 4. + Button In Bluetooth or USB Playback mode, press this button once to advance to the next track. Press and hold this button to adjust volume level up. Button Press and hold this button for 3 seconds to power on/off. ...
BATTERY CHARGING INSTRUCTION This unit operates on a built-in Li-ion battery that can be recharged either using the USB port on your computer or from a USB power adaptor (not included) with a rated output of DC 5V 500mA and up. Note: The mini USB CHARGING JACK located on this unit is only designed for charging the built-in Li-ion battery.
Page 8
adaptor (not included). Disconnect the USB cable from the speaker as soon as it is fully charged. Notes: 1. Charging time will vary if you are listening to music while charging the internal battery. We recommend you switch off the speaker power during the charging process. 2.
Page 9
Follow the manufacturer's instructions for charging the product and do not charge longer than recommended. Unplug the charger when the battery is charged or not in use. Note: The speaker is not magnetically shielded and may cause color distortion on the screen of some TVs or video monitors. To avoid this, you may need to move the unit further away from the TV or monitor if an unnatural color shifts or image distortion occurs.
Page 10
Pair the Speaker 1. Activate Bluetooth on the compatible device, and set it to search for compatible devices. 2. Select the speaker name:”MW-1464” from the list of found devices. Tips: Only one playback unit can be connected to the speaker.
Page 11
If pairing has been carried out successfully, the Blue color indicator stops flashing, meanwhile, voice prompt “Connected” and a beep sound is heard. If the speaker has ever been paired with a Bluetooth device before. You need to follow the pairing instructions below to link the speaker with your Bluetooth device .
Page 12
4. To end the call, just tap the button again, a short beep sound will be heard and the call will end. If you were playing music from your cell phone to the speaker before answering the call, the music will automatically resume playing when you hang up.
Page 13
OPERATING THE SPEAKER IN AUX-IN MODE If you are using an iPod, MP3/MP4 player or other mobile phone which can not connect this unit via bluetooth directly, you can still play it on the speaker via an audio connecting cable. 1.
Troubleshooting Guide Should you experience difficulties in the use of this player, please refer to the following chart. Fault Cause Solution The USB power adaptor Plug the USB power (not included) is not adaptor (not plugged into wall included) into a wall outlet or the USB cable outlet and plug the (included)is not plugged...
connection speaker again to the audio source. Increase the volume on the speaker Volume too low Increase the volume on the audio source. Check whether the audio source Pairing does not work supports the A2DP protocol Audio source Switch on the audio Speaker is switched off source...
Page 16
NOTE: Changes or Modifications not expressly approved by the party responsible could void the user’s authority to operate this device. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 17
-- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
Need help?
Do you have a question about the MW-1464 and is the answer not in the manual?
Questions and answers