Advertisement
Installation 1：Powered via AC/DC adapter
Step 1：Remove the antenna and cable from its packaging.
Step 2：Connect the included coax cable to the power supply box, then to the
"Antenna/Cable In" connection/port on the back of your TV.
Step 3：
Connect the separated AC/DC adapter to
Step 4：Setting & Scanning：In the TV's setup menu, set the mode to "Antenna" or "Air",
then set your TV to "Scan" for channels. Consult the TV manual for detailed instructions.
Power supply box
Installation 2：Powered via DTV set-top box
Step 1：Remove the antenna and cable from its packaging.
Step 2：Connect the included coax cable to the power supply box, then to
the "Cable/Set-top Box In" connector on the back of your TV.
Step 3：
Connect the separated AC/DC adapter to
Step 4：
Setting & Scanning：In the TV's setup menu, set the mode to "Antenna" or "Air",
then set your TV to "Scan" for channels. Consult the TV manual for detailed instructions.
Power supply box
1.Installation Instructions
power supply box and plug into an outlet.
DC12V/50mA
power supply box and plug into an outlet.
02
Old
TV
Advertisement
