Monster 140063-00 Quick Start Manual

Powered Digital Indoor TV Antenna, 75 ohm
(Part no. 140063-00)
This amplified antenna is designed to deliver exceptional Digital, High Definition* and Standard Analog TV broadcasting reception. It can receive all the
local TV signals in your area in both the VHF and UHF band, as well as the FM radio signal.
It is the best solution for home reception and digital portable TV reception.
* HDTV Tuner and Display required for High Definition Performance.
Installation:
Note: for the best reception, please check the following conditions:
1) Make sure the HDTV is turned off.
2) Keep the antenna away from the sources of interference (ie big power
consumption devices, such as air conditioner, elevator, hair dryer and
microwave oven)
3) Connect the antenna's coax 75 ohm cable to the antenna input jack on
the back of the HDTV.
4) After the connection has been completed, turn on the HDTV.
5) Then, select the Menu or Program button on your HDTV to setup your HDTV's input signal to Antenna or TV.
(See your HDTV's product manual).
6) After the HDTV input signal is set to Antenna or TV, scan the HDTV to search for all available local digital TV channels.
(See your HDTV's product manual)
7) Adjust the antenna position until you get the best signal reception and then mount. For best results, it is
recommended that the antenna be placed near a window and as high as possible. (Note: Reception can vary by location of the antenna and
proximity to the TV channel's broadcast transmitter.)
To power your antenna:
1) Connect the 75 ohm coax cable to the antenna input of your TV.
2) Plug the small end of the power cord into the power jack on the back of the antenna.
3) Plug the other end of the power cord into a standard electrical outlet.
4) Turn the power control dial until the power indicator light glows.
5) Then, adjust the antenna as described below to receive the best signal reception.
Note: This antenna can be used by either connecting it directly to a TV or a digital set-top box.
Signal Reception:
VHF Signals (Channel 1-12)
This antenna receives VHF signals (both analog and digital) through
the elements.
For best reception, adjust the 360° adjustable elements by either
shortening or extending them (Depends on the channel you want
to receive)
Also, move the antenna around until you get the best signal reception.
UHF Signals (Channels 21-69)
This antenna receives UHF signals through the UHF loop.
For best reception, adjust the UHF loop by tilting it up or down (Depends
on the channel you want to receive)
Turn the dipole sideways until you get the best signal reception.
Gain Adjusting
To adjust the amplifier gain, turn the ON/OFF knob until you get the best
signal reception.
a) To increase gain, turn the knob clockwise
b) To reduce gain, turn the know counter-clockwise
Form no: 140063-ENV1-0411
HDTV
Elements can
be turned 360°
Antenna
AC Adapter
Telescopic antenna for
receiving channels 1-12
Tilt UHF Loop for
receiving channels
21-69