Honeywell Lyric T5 Quick Install Manual page 13

13 Connect wires from Step 8.
Tip: Do not mount the UWP to the
wall prior to connecting the wires.
Push down on the tabs to put the
wires into the holes of their corre-
sponding terminals on the UWP
(one wire per terminal) until it is
firmly in place.
Gently tug on the wires to verify
they are secure.
Tip: If you need to release the wires
again, push down the terminal tabs
on the sides of the UWP.
14 Mount the UWP and close the door.
Mount the UWP using the provided
screws. Install all three screws for
a secure fit on your wall. Close the
door after you're finished.
33-00151EF_A.indd 13
This wiring is just and example,
13
yours may vary.
S A
L/A
S
O/B
Y W
AUX 2
Y
E
G W
C K
U R
U Rc
Use 3x
supplied
screws #8
1-1/2"
6/24/2016 4:20:33 PM