Subscribe to Our Youtube Channel
Related Manuals for PHYSITEMP TCAT-2DF
Summary of Contents for PHYSITEMP TCAT-2DF
-
Page 1: Table Of Contents
SETTING UP THE TCAT-2DF OPERATING INSTRUCTIONS SPECIFICATIONS MAINTENANCE, WARRANTY AND SERVICE Appendix 1 Installation instructions for HP-1 and HP-4 Warming Plates Appendix 2 Installation instructions for WB-1 and WB-2 Warming Blankets QX P:\CW shared\TCAT\EB TCAT-2DF PAK 400 Rev 2 3/5/13... -
Page 2: General Description
The TCAT-2DF combines features of both the instruments described above. A type T thermocouple probe is used as the temperature feedback sensor and any of Physitemp’s extensive line of probes can be used for this application. -
Page 3: Setting Up The Tcat-2Df
SETTING UP THE TCAT-2DF CONTROLLER WITH A HEATING PAD LOW VOLTAGE HEATING PAD Connect a suitable load to the LVDC output (12VDC 3A max) Insert a type T thermocouple feedback sensor into the blue socket. Ensure that the sensor tip is securely attached to the load at an appropriate location. -
Page 4: Operating Instructions
To return to original position, pull down slightly, then rotate back. Serial Number: 9010 PHYSITEMP INSTRUMENTS INC 154 Huron Avenue Clifton, NJ 07013 USA Tel: 973-779-5577, Fax: 973-779-5954 Made in USA QX P:\CW shared\TCAT\EB TCAT-2DF PAK 400 Rev 2 3/5/13... - Page 5 Size: 7 3/8”wide x 10” deep x 4 3/8' high Weight: 2.8 lbs Other features: Special Display Indications: Red lamp will be on when load is being controlled Adjustable viewing angle QX P:\CW shared\TCAT\EB TCAT-2DF PAK 400 Rev 2 3/5/13...
- Page 6 12 months from date of shipment. Repair or replacement will be made at no charge at the discretion of Physitemp if the defect is not the result of misuse or abuse. Physitemp accepts no consequential liability for delay in delivery, alleged faulty performance of the product or any other cause.
-
Page 7: Specifications
12 months from date of shipment. Repair or replacement will be made at no charge at the discretion of Physitemp if the defect is not the result of misuse or abuse. Physitemp accepts no consequential liability for delay in delivery, alleged faulty peformance of the product or any other cause. -
Page 8: Appendix 2
12 months from date of shipment. Repair or replacement will be made at no charge at the discretion of Physitemp if the defect is not the result of misuse or abuse. Physitemp accepts no consequential liability for delay in delivery, alleged faulty per-... - Page 9 PHYSITEMP INSTRUMENTS INC 154 Huron Avenue Clifton NJ 07013 USA Tel: 1-800-452-8510 Tel: 1-973-779-5577 Fax: 1-973-779-5954 e-mail: info@physitemp.com www.physitemp.com OPERATING MANUAL TCAT-2DF CONTROLLER QX P:\CWS\TCAT\EB TCAT-2DF PAK 400 Rev 2 3/5/13...
Need help?
Do you have a question about the TCAT-2DF and is the answer not in the manual?
Questions and answers