GreenBrook WNBP-C Installation Manual

WEATHERPROOF PROTECTION
WEATHERPROOF
SWITCHES
• Simple to install
• Designed for damp, dusty and dirty
environments
• Rated to IP44
• Conforms to BS EN 60529
MODEL NUMBERS: WNBP-C,
WNSW-C, WNSW2G-C & WNSWDP-C
These GreenBrook Weatherproof
Switches are designed specifically for
use where damp or dusty conditions
may be encountered.
Engineered to perform in dirty environ-
ments, in industry, farms, gardens,
beside swimming pools, indeed wher-
ever exposure to dust or splashing
water may be encountered.
These tough, durable items are easily
installed. The switches are protected to
IP44 standard. The units are injection
moulded in polycarbonate ensuring
high resistance to impact in extremes
of temperature.
1. This product should be installed by
a competent person (e.g. qualified
electrician) in accordance with these
instructions and in compliance with
the appropriate clauses of the
current edition of the IEE Wiring
Regulations.
2. The electrical supply must be
disconnected prior to installation or
maintenance.
3. Where metal conduit is used, earth
continuity must be maintained with
the use of a suitable earth link.
INSTALLATION

STEP 1.

WARRANTY BECOMES INVALID IF I.P.
RATING IS NOT MAINTAINED.
1. The mounting surface must be flat
IP44

SAFETY

GUIDE