NEVER service with the power on. Out of Box Setup and Test The Eversan, Inc. 9385 series scoreboard system comes complete and ready to operate. NOTE: Follow these instructions in order to assure correct operation and installation. Warranties will be void if the procedures below are disregarded. Failure to test scoreboard prior to hanging will void all warranties.
Page 7
1. It is recommended that a professional sign company be hired to install the scoreboard (see drawings). Eversan recommends a minimum footing depth of 5.5 ft. and a diameter of 2.5 ft. 2. Calculate the wind loading by standard formula for height and dimension of sign. The total dimension of the sign is 30IN.
The scoreboard should always be powered down when not in use. Power Requirement: 120VAC @ 6 amp for the 9385 scoreboard. Eversan, Inc. recommends using a 10-amp, GFCI, breaker for outdoor scoreboard power. The center section of the scoreboard requires 120VAC.
Page 11
Wireless control console battery operation (optional): 1. Turn the scoreboard power on. 2. Attach Eversan, Inc.’s special battery connector to the 4-pin connector on the back of the wireless control console (see diagram). 3. Connect the cigarette lighter plug into the Eversan battery pack or a car cigarette lighter.
Page 12
Should you have a problem: The Eversan Outdoor Scoreboard is designed to allow the customer to plug in parts for repair or replacement. Please call our qualified service technicians if you experience any difficulties. We can assist you in solving your problem or help in returning the section in need of repair.
Need help?
Do you have a question about the 9685 and is the answer not in the manual?
Questions and answers