Page 2
Vicon Lock+ Quick Start Guide Introducing Lock+ Lock+ is a connectivity device from Vicon, offering a cost-effective and silent solution for providing synchronization and timecode to your Vicon Vantage and Vicon Vue cameras. Lock+ features: Timecode and genlock ▌...
NTSC Film, and 30 fps), LTC is Timecode input: LTC required for timecode. VESA sync input VESA sync input. 3-pin mini DIN socket. Current Vicon software VESA sync output (reserved for supports 100Hz and 120Hz. future use) VESA sync output. Reserved for Remote Control input stop future use.
Page 4
Vicon Lock+ Quick Start Guide Connecting analog devices The Weidmüller connectors enable you to connect third-party devices for capturing analog data, such as force plates and accelerometers to a Lock+. When inserting flexible wire cables into a connector or extracting them...
8. Mercury (Hg). interference that may cause undesired operation. Conformity information REACH Declaration of Conformity Vicon Motion Systems Ltd is a Canadian Interference-Causing manufacturer of electronic hardware. Federal Communications Equipment Regulations for We are therefore considered a Commission (FCC) Part 15 Canadian customers “downstream user”...
The following guidance helps you to This declaration of conformity is issued in the European Union and other ensure the safe operation of your Vicon under the sole responsibility of the European countries with system, including the use of Lock+.
For use with Vicon Lock+ 1.0 Vicon Motion Systems Limited reserves the right to make changes to information in this document without notice. Companies, names, and data used in examples are fictitious unless otherwise noted. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic or mechanical, by photocopying or recording, or otherwise without the prior written permission of Vicon Motion Systems Ltd.
Need help?
Do you have a question about the Lock+ and is the answer not in the manual?
Questions and answers