GFA Multiuser receiver 433/500 Installation Manual page 8

Memorization of the User transmitters
The receiver will memorize the first transmitter in the
following way:
- USER n. 001: the transmitter will be memorized in
position 001;
- RELAY 1/2: the transmitter will control relays 1 and 2
of the receiver;
- KEY A: button A of the transmitter will control relay 1
of the receiver and button B relay 2.
See
"ENTRY INTO THE MAIN MENU"
MENU
STORE USER ?
TRANSMITTER N° 2 MEMORIZATION
US: 002 RL: ½ KY: A
STORE USER ?
Choice of "RELAY" or "CHANNEL" parameters
For every transmitter the receiver offers:
- a position to memorize;
- the relay or relays which will be activated by the
transmitter;
TX 2 keys
A on relay 1
Relay 1/2
B on relay 2
Relay 1
A on relay
Relay 2 A on relay
Pag. 8
Transmitter
Master Nº 1
STORE USER
USER Nº 001
YES
TRANSMITTER N° 2 MEMORIZATION
Transmitter
Nº 2
EXECUTED OK
YES MORE ....
Channel A
TX 4 keys
A on relay 1
B on relay 2
1
A on relay 1
2
A on relay 2
Each of these parameters can be modified. See "Change
a number or a letter" (p. 5) and "Modify relay or key
parameters" (p. 8).
GfA ELEKTROMATEN UK Ltd
Before memorizing the transmitters, we advise you to number
them, marking each one with an indelible pen. For
example:transmitter to memorize on Position n. 348.
Transmitter
Master Nº 1
*
USER Nº 001
YES RELAY: ½ KEY: A
Transmitter
Nº 3
UT: 003 RL: ½ TA : A
NO+ YES
STORE USER ?
- the channel or channels used by the transmitter.
The table below show the correspondences between
what appears on the display and the setting of the
transmitter buttons on the receiver relays.
Channel B
TX 2 keys TX 4 keys
B on relay
B on relay 1
C on relay 2
B on relay 1
B on relay
B on relay 2
B on relay
Transmitter
Master Nº 1
*
USER Nº 001
YES
START PROG ...
Transmitter
Nº 3
EXECUTED OK
NO+ YES
MORE...
Channel C
TX 4 keys
1 C on relay 1 D
D on relay 2 A on relay 2
D
1 C on relay 1
D
C on relay 2
2
Advice
Channel D
TX 4 keys
on relay 1
on relay 1
on relay 2