Download Print this page

Yo-Yo Desk 32 Series Assembly Manual

The smoother smarter way to work

Advertisement

Quick Links

Please don't put your hands on the supporting
WA RNING
!
bars, as they move during adjustment and
Hands Pinching
Do not place your hand near the strut.
may cause injury.
Strut's angle will change during the
desktop lifts and it may hurt you.
Please make sure that all equipment is fully on top of
the Yo-Yo Desk
may fall and cause harm/get damaged.
When using the adhesive Cable Ties, make sure
that you leave enough length in the cable to allow
for the full range of height adjustment, otherwise
your equipment may get damaged.
When first using your desk, please carefully set it to
its maximum height, to check that you can raise the
desk without causing damage to your equipment or
yourself.
Please ask someone to assist you when lifting the
desk to prevent causing harm or injury.
sales@yo-yodesk.com
1-800-768-9936
Copyright © 2018 Yo-Yo Desk
®
Inc. All rights reserved
Page 8 / 8
CAUTION
CAUTION
, not hanging over the edges, as it
®
CAUTION
CAUTION
CAUTION
Assembly Manual
Please read all instructions carefully before using this product. Retain this
manual for future reference. The specifications of this product may vary slightly
from the illustrations and are subject to change without notice.
Copyright © 2018 Yo-Yo Desk
®
Inc. All rights reserved
CAUTION

Advertisement

loading

Summary of Contents for Yo-Yo Desk 32 Series

  • Page 1 The specifications of this product may vary slightly from the illustrations and are subject to change without notice. sales@yo-yodesk.com 1-800-768-9936 Copyright © 2018 Yo-Yo Desk ® Inc. All rights reserved Copyright © 2018 Yo-Yo Desk ®...
  • Page 2: Technical Data

    Page 2 / 8 Page 7 / 8 TECHNICAL DATA ASSEMBLY STEP 5 Use the Cable Management Clips & Cable Ties to manage the cables. The Desktop and Keyboard Tray have a defined weight tolerance level. Do not WARNING exceed the maximum bearing weight. WEIGHT TOLERANCE LEVEL Maximum 33lbs Maximum 4lbs...
  • Page 3 ® ® CAUTION CAUTION Please make sure that all equipment is fully on top of the Yo-Yo Desk . It Please place the Yo-Yo Desk on a surface suitable to hold the entire base ®...
  • Page 4 Page 4 / 8 Page 5 / 8 ASSEMBLY STEP 2 ASSEMBLY STEP 3 Cut the plastic strip locks and remove the Frame Protectors (see picture). Place the Keyboard Tray onto the keyboard rack. Put the screw cap on top of the Keyboard Tray, place your finger on top of the Screw Cap while you are tightening each screw through the...

This manual is also suitable for:

38 series