Related Manuals for WaterFurnace TP32U03
Summary of Contents for WaterFurnace TP32U03
- Page 1 997-060180-6 96P684-01 User’s Manual TP32U03 Programmable / Non-Programmable TP32U04 Programmable/ Non-Programmable with Humidity Control TP32U05 Programmable with Daughter Board (4-Wire) Menu Driven Display...
- Page 2 997-060180-6 setting. Use the up and down arrows keys ▲▼ to select the desired temperature and press the center button on the keypad. Next it will prompt you for a date and time that you wish to return to programmed operation. Returning to the Main Screen, you will notice that in the upper part of the screen is alternating HOLD TIL *date and time you specified* and the actual date and time.
-
Page 3: Humidity Offset
997-060180-6 From the Main Menu, scroll to MENU and press the center button ■ on the keypad. OFFSETS Select SETINGS → SCREEN SETTINGS →BACKLIGHT ON TIME MENU → SETTINGS → OFFSETS You can change the backlight on time by using the up and down arrows TEMPERATURE OFFSETS ▲▼. - Page 4 997-060180-6 TP32U03 & TP32U04 THERMOSTATS ONLY INSTALLER THERMOSTAT GEOTHERMAL INFORMATION / ADVANCED FEATURES SAFETY CONSIDERATIONS Improper wiring or installation may damage thermostat. Wiring must conform to local and national electrical codes INTRODUCTION The thermostat is a wall mounted, low-voltage thermostat which maintains room temperature by controlling the operation of a heating and air conditioning system.
- Page 5 997-060180-6 Air Filter - Cumulative Run Time default is 1000 hours and Calendar Time is DIFFERENTIAL 6 months. Values can range from 400-3600 hours for Cumulative This adjustment will vary the number of degrees, from the set point, before Run Time (in 100 hour increments), or Calendar Time can be set to a call for heating or cooling is made.