Audiovox GMRS1100-2CH Owner's Manual page 15

- Press the PTT, Monitor or CALL button to confirm selection of the dual
watch channel. The display will now alternate between the primary
channel and the dual watch channel just selected.
- To cancel the dual watch mode, repeat the first two steps, but set the
dual watch channel to 0. Press the PTT, Monitor or CALL button to
confirm the selection.
Out of Range Alert Indication
The GMRS1100-2CH provides an Out-of-Range alert feature whenever
reception is no longer intelligible or too weak to be discernible. This condi-
tion occurs at a signal strength below the squelch level. The lack of signal
strength causes the unit to emit an alert beep, reminding you that you are
outside the range of the unit, or that signal reception is being obstructed by
natural or man-made objects.
To enable the Out-of-Range Alert:
- From the GMRS/FRS standby mode, press the Function button seven
times; Or appears on the display, together with a flashing On or OF
indication.
- To enable the feature, press the Up or Down button to select On; then
press the PTT, Monitor or CALL button to confirm the selection.
- To turn the feature off repeat the first step and then select OF.
Caller Identification (ID) and Call Melody Select
The caller ID function allows you to assign an ID code between 1 and 9,
accompanied by a unique call tone; this code and tone accompanies your
transmission whenever you call another party, and will appear at the
receiving unit, provided it has caller ID capability.
To select a caller ID code and/or tone for your unit:
- From GMRS/FRS standby mode, press the Function button eight times;
Cd appears, together with a flashing On or oF indication.
15
128-6297
15 of 24