Bluetooth Function Operation; Operating Instructions - Pyle PUNP37BT Instruction Manual

OPERATING INSTRUCTIONS

Radio Operation
1. Turn the unit on by rotating the VOLUME/ON/OFF Knob located of
the front
panel to the on position.
2. Rotate the functions knob to select AM or FM mode.
3. Select the desired station by rotating the TUNING knob.
4. Adjust the VOLUME knob to the desired sound level.
Antenna Information
The AM antenna is inside the cabinet. If AM reception is unsatisfac-
tory, Try repositioning the cabinet slightly until the internal antenna
is picking up the strongest signal. The FM wire antenna is located on
the back of the cabinet. If necessary, adjust the position and direc-
tion of this antenna until you find the position that provides the best
reception.
USB Operation
1. Insert the USB into the USB socket.
2. Press the USB ON/OFF button to set the USB function on.
3. Playback will start automatically, and the USB indicator will
remain on.
4. Adjust the VOLUME knob to the desired sound level.
5. To pause playback, press the PLAY/PAUSE button.
6. Press the Forward Skip button or Backward Skip button to
select the desired track.
7. To stop playback, Press the USB ON/OFF button again .

BLUETOOTH FUNCTION OPERATION:

1. Rotate the FUNCTIONS KNOB to select BLUETOOTH mode.
2. Turn on your Bluetooth device and scan.lt will be displayed as
"Pyle Radio" when discovered by your Bluetooth device. Enter
password "0000" during pairing if necessary.