Hydraulic Connections; Condensate Drain Connections - Mark TANNER CLA 070 Technical Manual

HYDRAULIC CONNECTIONS

A correct installation provides also the anti-condensate insulation of the water pipes.
Always use adequate keys to avoid the damage of the connections.
The disposition of the water connections for the 2-pipes cassette is reported in fig. E,
while the one for the 4-pipes cassette is reported in fig. F.
TYPE 070/090
TYPE 094
TYPE 150
TYPE 154

CONDENSATE DRAIN CONNECTIONS

For its proper functioning, it is recommended to fix the condensate drain duct with a
minimum slope of 2 cm/m.
Remember also that the maximum head of the pump is of 100 cm from the bottom edge of
the unit. (Fig. G)
Any condensate loss because of an incorrect connection of the drain is not
attributable to the manufacturer.
6
Fig. E
Fig. F
Fig. F
Fig. E