Related Manuals for Resco 7000 Series
Summary of Contents for Resco 7000 Series
- Page 1 Product: Product Code: Resco Series 7000 S-7000R Installation Guide Return version. Updated August 2014 Step-by-step Installation Guide RETURN VERSION August 2014...
- Page 2 2 MAN LIFT. Use suction lifting aids if available. DO NOT walk-over. Take care when moving panels they can be damaged if not handled correctly. Resco Series 7000 Return version. Step-by-step Installation Guide. August 2014...
-
Page 3: Other Tips
“off the shelf” wood-polish will rejuvenate the original polished seen edges. See our Web site: www.resco.co.nz/product/multicom - Cleaning instructions For removal of graffiti – Please call our customer service team 0800 800 950 Resco Series 7000 Return version. Step-by-step Installation Guide. August 2014... -
Page 4: Important Notes
Stool or small step ladder Timber blocks (155 mm) Timber wedges Rivet tool 3.5 mm drill bit 5 mm Masonry bit No. 1 Square drive No. 2 Pozi-drive Drop saw Nylon hammer Circular saw Resco Series 7000 Return version. Step-by-step Installation Guide. August 2014... - Page 5 From the plans mark the division centers on the back wall. a. Check location of toilets and ensure centered (these are sometimes fitted different to the plans). Resco Series 7000 Return version. Step-by-step Installation Guide. August 2014...
- Page 6 Use (A) 8GA x 32 screws. Keep adhesive away from extrusion edges. Place MS Polymer adhesive along the ½ Stile back and the side as shown. Only on the Return ½ Stile at this stage. Resco Series 7000 Return version. Step-by-step Installation Guide. August 2014...
- Page 7 Insert end Fascia in place with rounded edge at top and screw fix using 1¼” countersunk screws. Ensure that you leave a gap of 2-3mm behind the screen for the aluminium bead to slot in to. Resco Series 7000 Return version. Step-by-step Installation Guide. August 2014...
- Page 8 Full-Stiles Angle Bracket locations. This will mean the rest will be perfect. Drill holes for the floor Angle Brackets. Resco Series 7000 Return version. Step-by-step Installation Guide. August 2014...
- Page 9 Use 4 (E) 8GA x 20 screws. Install wall ½ Stile Fascia using Polymer as you did (Only screw a few turns in this stage). for the Return panel in Steps 6 and 7. Resco Series 7000 Return version. Step-by-step Installation Guide. August 2014...
- Page 10 Clip into place. Step May need trimming Repeat for the remaining Stiles and Fascias – Check the last Fascia before fixing as it may need trimming. Use a tungsten tipped blade. Resco Series 7000 Return version. Step-by-step Installation Guide. August 2014...
- Page 11 Te R apa , Hamilton 320 0. New Zealand Phone: 080 0 80 0 950, +64 850 1025 Fa x: +64 7 850 1026 (w w w.resco.co.nz) © Resco Augus t 2014 Resco Series 7000 Return version. Step-by-step Installation Guide. August 2014...
Need help?
Do you have a question about the 7000 Series and is the answer not in the manual?
Questions and answers