Advertisement
MOUNTING
HOLE
THIS DEVICE MUST
MOUNTED WITH THE
SCREWS SUPPLIED
HOLDUP SWITCH SHOWN MOUNTED
IN TYPICAL UNDER COUNTER APPLICATION
SPECIFICATIONS
Physical:
Electrical:
Contact
Rating:
Operating
Temperature:
Agency:
Reset Key:
Regular maintenance and inspection (at least annually) by the installer and frequent testing by the user are
vital to continuous satisfactory operation of any alarm system.
The installer should assume the responsibility of developing and offering a regular maintenance program
to the user, as well as acquainting the user with the proper operation and limitations of the alarm system
and its component parts. Recommendations must be included for a specific program of frequent testing (at
least weekly) to insure the system's operation at all times.
ÊK0315ÈŠ
K0315 12/02 Rev. D
MOUNTING
HOLE
PROTECTIVE
STEEL COVER
(269R ONLY)
MOUNTING
IMPORTANT:
SCREW (2)
No. 6X1 3/4
BE PERMANENTLY
(SUPPLIED)
Figure 4
2"W x 3-1/2"H x 1-1/4"D
(51mm x 89mm x 32mm)
0.2 A @ 30 VDC (MAX)
WARNING: Observe contact rating limitations.
Do not use to switch Line Voltage AC current.
14°F to 140°F
-10°C to 60°C
UL 636 – Holdup alarm units and systems
Supplied, Part Number K4563 to order separately
WARRANTY INFORMATION
For the latest warranty information, please go to:
www.honeywell.com/security/hsc/resources/wa
TO THE INSTALLER
C
R
LISTED
2 Corporate Center Drive, Suite 100
P.O. Box 9040, Melville, NY 11747
Copyright © 2010 Honeywell International Inc.
www.honeywell.com/security
US
Advertisement
