Advertisement
5
electrolux.com.au
GUIDE TO THE APPLIANCE
COMPONENTS
1
Control panel
Anti-slip mat
2
(for keeping crockery secure)
Press the middle of the drawer firmly to open or close it. When opening,
the drawer pops out slightly. You can then pull it out towards you.
CONTROL PANEL
1
2
1
For warming cups and glasses
2
For warming plates and dishes
3
For keeping food warm
4
For setting the temperature
The appliance can be used to keep food warm at the
same time as warming plates and dishes, but please
ensure food is covered properly to prevent spillage.
2
1
3
4
5
6
7
8
5
For setting the duration
6
For adjusting temperature and time
7
Cancel button
8
Start button
OPERATION
FUNCTION SETTINGS
1
In waiting state, press
to start the function
of warming cups and glasses to 40°C.
2
40°C will display.
3
Touch
or
to adjust the temperature.
4
Touch
and then touch
or
to adjust
the warming time.
5
Touch
to set the temperature and time.
6
Close the door, there will be a beep, and then
the appliance will start working.
NOTE:
•
During parameters setting, you can press other
function keys to change the function between
(Low),
(Med) and
(Keep Warm).
•
Before closing the door, you can touch
cancel the setting and the appliance will go back
to waiting state.
•
During the process of working, open the door to
enter the parameter adjusting mode, then press
or
to adjust the temperature.
•
You can press either
or
to select which
parameter you need to adjust, then press
set the temperature or time.
•
After saving the setting as above, you can press
to enter the waiting state, or close the door
to start working.
The appliance will beep to give user feedback when
buttons are touched. The appliance will automatically
switch off after 1 hour if the Duration Timer has not
been set.
Duration Timer
The timer default duration is 1 hour. Longer durations can
be set by touching the
sensor. One touch for 1 hour
(1h), two touches for 2 hours (2h), etc., to a maximum of
6 hours.
The appliance will beep 3 times when the duration timer
is finished.
TEMPERATURE SETTINGS
Each function has its own temperature range. The factory-
set recommended temperatures are printed in bold. The
temperature can be altered in 5° steps by touching the
sensor. The last temperature selected is automatically
activated the next time the drawer is switched on, and
this is shown in the display.
Low
Med
Min.
40°C
60°C
Max.
60°C
80°C
CAPACITY
The quantity that can be loaded will depend to a great
extent on the size and weight of your own crockery. Do not
to
overload the drawer. The maximum load bearing capacity
of the drawer is 25 kg. Under the maximum load bearing
capacity, the drawer should be opened or closed carefully.
Here are some suggested examples of loading capacities:
•
6 dinner plates Ø 26cm
•
6 soup plates Ø 23cm
to
•
6 dessert dishes Ø 19cm
•
1 oval platter Ø 32cm
•
1 medium serving bowl Ø 16cm
•
1 small serving bowl Ø 13cm
6
Keep Warm
60°C
80°C
Advertisement
