Third Row Seats - PEUGEOT 5008 Handbook

- prevents objects from sliding beneath the
2 nd
row seats.
The continuity panels are held against the
backrests with a magnetic fixing element.
These continuity panels are not designed
to support a weight greater than 30 kg.
Before deploying the continuity panels,
check that the 2 nd row seats are pulled as
far back as possible.
Access to third row seats
Third row seats are accessed via the second
row outer seats.
From the outside or from the 3 rd row seats:
F Check that the "aircraft" type tables of the
front seats are properly folded.
F Pull lever D and guide the backrest forwards
to tilt it and move the seat to the front.
To put the seat backrest back in place:
F Straighten the backrest until the seat locks.
Whatever the initial position of the seat, it
is placed automatically at one third of the
longitudinal adjustment range in order to
preserve enough space for passengers in the
3 rd row seats.
If this system fails (lever D), the 3
passengers can also exit after having
nd
folded the backrest of the 2 row seats
using strap C.
Do not let children operate the seats
unsupervised.

Third row seats

The two seats in the 3 rd row are stored in the
folded away position at the back of the boot.
Each is covered with a rigid concertina board
attached to the vehicle.
Do not let children operate the seats
unsupervised.
Each concertina board can support
a maximum load of 100 kg with the 3
seats folded away.
With the 3 rd row seats removed and the
removable concertina board carriers
installed, the maximum load is limited
to 40 kg.
rd
row
When there is a seat at the back of the boot,
the removable carrier is fixed against the wall in
front of its holder.
If you remove the seat from the back of the
boot for extra storage space, you must place
the removable carrier on the two lugs on the
central wall.
Ease of use and comfort
rd row
3
79