In The Event Of A Breakdown; Warning Triangle; Running Out Of Fuel (Diesel) - PEUGEOT 5008 Handbook

Hide thumbs Also See for PEUGEOT 5008:
Table of Contents

Advertisement

In the event of a breakdown

Warning triangle

As a safety precaution, before leaving your
vehicle to set up and install the triangle, switch
on the hazard warning lamps and put on your
high visibility vest.
Storage compartment
There is a compartment in the interior trim of
the tailgate to store a triangle.
F Open the tailgate.
F Release the cover by turning the screw
a quarter turn anti-clockwise.
240
Assembling the triangle
For versions supplied with a triangle as original
equipment:
F remove the triangle from its case,
F unfold the legs,
F open out the two sides of the triangle,
F clip them together to complete the
assembly.
For other versions, refer to the instructions
provided with the triangle.
Positioning the triangle
F Place the triangle behind the vehicle, as
required by local legislation.
Running out of fuel
(Diesel)
On vehicles fitted with Diesel engines, the fuel
system must be primed if you run out of fuel.
If the engine does not start first time, do not
keep trying, but start the procedure again from
the beginning.
For more information on Misfuel
prevention (Diesel), refer to the
corresponding section.
With 1.6 BlueHDi and
2.0 BlueHDi 150 S&S engines
F Fill the fuel tank with at least 5 litres of
Diesel.
F Switch on the ignition (without starting the
engine).
F Wait around 6 seconds and switch off the
ignition.
F Repeat the operation 10 times.
F Operate the starter to run the engine.
With 1.5 BlueHDi and
2.0 BlueHDi 180 S&S engines
F Fill the fuel tank with at least 5 litres of
Diesel.
F Switch on the ignition (without starting the
engine).
F Wait around 1 minute and switch off the
ignition.
F Operate the starter to run the engine.
If the engine does not start, repeat the
procedure.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents