Page 2
This user guide is subject to change without notice. For the latest online version, visit: www.voidacoustics.com Void Acoustics and the Void logo are registered trademarks of Void Acoustics Research Ltd. in the United Kingdom, USA and other countries; all other Void trademarks are the property of Void Acoustics...
Void Acoustics Research Ltd for 1.2 Limitations reprocessing. For more information about where you can send your waste equipment for recycling, please contact Void Acoustics Research Ltd or one of your local distributors.
When you are removing your Arcline 218 loudspeaker from its original packaging: • Arcline 218 loudspeakers come packaged in a lid and base carton that has a protective sleeve around it; avoid using sharp implements to remove the cardboard to protect the finish •...
In buying this product, you are now part of the Void family and we hope using it brings you years of satisfaction. This guide will help you both use this product safely and ensure it performs to its full capability.
2 Ω load Metric mm Imperial AWG 2.50 mm 13 AWG 36 m 18 m 4.00 mm 11 AWG 60 m 30 m 15 m 5.3 Impedance graph Frequency (Hz) Figure 5.1: Impedance graph Arcline 218 User Guide V1.0 Page 9...
Bias Q5 Figure 5.4: 1 x Arcline 218 and 2 x Arcline 8: 8 Ω per channel / 1 amplifier Bias Q5 Figure 5.5: 2 x Arcline 218 and 4 x Arcline 8: 4 Ω per channel / 1 amplifier Bias Q5 Figure 5.6: 3 x Arcline 218 and 6 x Arcline 8: 2.66 Ω...
6.2 Typical modes Although the modes of arrangement shown here are typical operating modes for low frequency enclosures, the Arcline 218 system’s symmetrical design lends itself to wide range of configurations. Simple planer arrays and stacks to directional and steerable arrays are possible given suitable electronics and presets.
Utilizing a cardioid configuration will reduce stage noise and increase forward directivity at the cost of more loudspeaker power. The Arcline 118 and Arcline 218 can be arrayed in a variety of cardioid configurations depending on the requirements of the system with a few examples shown below. For other layouts or more information, please contact your local Void distributor/dealer.
Replace the M8 bolts by hand until finger tight before using hand tools. Note: Replacing bolts is of particular importance as without them there can be air leakage and detuning. Figure 7.3: Bolt tightening Arcline 218 User Guide V1.0 Page 14...
Before returning your faulty product for repair, please remember to get an R.A.N. (Return Authorisation Number) from the Void dealer who supplied the system to you. Your dealer will handle the necessary paperwork and repair. Failure to go through this return authorisation procedure could delay the repair of your product.
(two per side) for efficient manual handling. External dimensions of (H) 550 mm x (W) 1316 mm x (D) 695 mm (21.7” x 51.8” x 27.4”). Weight shall be 91 kg (200.6 lbs). The loudspeaker system shall be a Void Acoustics Arcline 218. Arcline 218 User Guide V1.0...
Page 20
North America Void Acoustics North America 503-854-7134 sales.usa@voidacoustics.com Head Office Void Acoustics Research Ltd Unit 15 Dawkins Road Industrial Estate Poole Dorset BH15 4JY England +44 (0) 1202 666 006 info@voidacoustics.com Registered in England & Wales No. 07533536 www.voidacoustics.com...
Need help?
Do you have a question about the Arcline 218 and is the answer not in the manual?
Questions and answers