Advertisement
Windows® Installation (98SE, Me, 2000, XP)
3.
Windows will detect the adapter. Follow the procedures below for your
version of Windows, then continue with Step 4:
Windows 98SE
N
The "Add New Hardware Wizard " dialog will appear. Click Next.
N
Insert the Intel CD-ROM into your CD-ROM drive. If the
PRO/Wireless LAN Products menu appears, leave it open.
N
Click the New Hardware Wizard screen to make it active. Select
"Search for the best driver for you device (Recommended)," and
click Next, then select "CD-ROM drive" and click Next.
N
The Adapter Properties screen will appear. On the Settings tab:
(option a) click OK to install using a default profile or (option b) click
Configure to set up a profile using configuration information
obtained from your network administrator. On the My WLAN places
dialog, click the New button to create a new profile. Type a
configuration name and the SSID for your wireless network. Set up
security and other parameters if required. Click OK twice, then
Close.
N
On the Add New Hardware Wizard screen, click Finish.
N
When prompted to restart the computer, click No (restart manually
after completing software installation). Proceed to Step 4.
Windows Me
N
The "Add New Hardware Wizard " dialog will appear. DO NOT click
Next. Verify that "Automatic search for a better driver
(Recommended)" is checked.
N
Insert the Intel CD-ROM into your CD-ROM drive. Windows will
install the driver from the CD-ROM. If the PRO/Wireless LAN
Products menu appears, leave it open.
N
The Adapter Properties screen will appear. On the Settings tab:
(option a) click OK to install using a default profile or (option b) click
Configure to set up a profile using configuration information
obtained from your network administrator. On the My WLAN places
12
Advertisement
