Advertisement
6-32 x 1-1/4
SELF-TAPPING
SCREWS
FIGURE 3 - A3730BKT
UNIVERSAL BRACKET
6-32 x 1-1/4
SELF-TAPPING
SCREWS
FIGURE 4 - A3730TNK
BOOT/TRUNK BRACKET
6-32 x 1-1/4
SELF-TAPPING
SCREWS
ADHESIVE PAD
FIGURE 6 - A3730WIN
WINDOW BRACKET
Make sure the mounting surface is clean before applying the
bracket. A 50% isopropyl alcohol and 50% water solution is
recommended for cleaning the mounting surface. Remove the
backing from the adhesive pad on the bracket. Press the ad-
hesive on the bracket firmly against the mounting surface. The
adhesive will reach 20% of its maximum bond after 20 minutes,
75% after 1 hour, and 100% after 3 days. Mount the 3730 to the
bracket as shown using the two #6 screws through the front of
the unit.
Mounting Brackets (Optional accessories, sold separately.)
MOUNTING
BRACKET
Mount the 3730 on the bracket as shown in the appropriate dia-
gram. Push the two 6-32 x 1-1/4 screws through the mounting
holes at the front of the unit and through the holes in the rubber
mounting gasket. Drive the self-tapping screws through the
holes or slots of the bracket.
Brackets with holes, instead of slots, do not require washers and
nuts once the screw has been torqued to 15 in-lb. It is recom-
mended that excess screw length be trimmed.
Caution:
MOUNTING
BRACKET
6-32 x 1-1/4
SELF-TAPPING
SCREWS
MOUNTING
BRACKET
6-32 x 1-1/4
SELF-TAPPING
SCREWS
Mount the A3730LIC bracket to the lower or upper two license
plate screw holes between the plate and the vehicle. Then,
mount the 3730 lights onto the bracket as shown.
Do not overtighten the screws.
FIGURE 5 - A3730DCK
DECK BRACKET
US style license plate only.
MOUNTING
BRACKET
FIGURE 7 - A3730LIC
LICENSE PLATE BRACKET
MOUNTING
BRACKET
Advertisement
