Table of Contents
Advertisement
The following drawing shows the dimensions of the housing:
Parameterization and commissioning
2.2
The parameterization of the RelAir R2M is done with the help of the free software RelAirConf,
which you will find on our CD "Tools & Docs" or on our homepage www.relay.de. You can either
use the USB interface with a mini-USB cable or directly the M-Bus interface. Please note that
the RelAir R2M gateways cannot be used without parameterization.
The configuration procedure can be found in the separate user manual for the RelAirConf
software.
User Manual RelAir R2M · 07/2018 · VERSION 1.1
Finally, the housing cover incl. printed circuit board
is clipped onto the already mounted mounting plate.
To do this, attach the lid to the top edge of the
mounting plate and press the lid firmly onto the
plate until it snaps into place.
RELAIR R2M
8
Advertisement
Table of Contents
