2.2 Mounting and cabling RelAir Home
User Manual RelAir R2M · 07/2018 · VERSION 1.1
This figure shows the assembled printed circuit
board including the connection terminals for the
M-Bus line (s) and the mini USB
The housing must first be opened for assembly. To
do this, push the tip of a slotted screwdriver one
after the other into the two openings on the lower
side so that the locking mechanism of the cover is
released from the mounting plate.
Subsequently, the upper shell can be lifted off the
mounting
plate.
RELAIR R2M
socket.
5