Advertisement
Quick Links
SIMATIC Ident
RFID systems
MDS D423
Compact Operating Instructions
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The
notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage
have no safety alert symbol. These notices shown below are graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of
injury to persons with a safety alert symbol may also include a warning relating to property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with
the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their
training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products
and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage,
installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any
problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed.
© Siemens AG 2012 - 2013. All rights reserved
C79000-G8976-C319-01, 05/2013
1
Advertisement
Related Manuals for Siemens MDS D423
Summary of Contents for Siemens MDS D423
- Page 1 WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
-
Page 2: Ordering Data
Table 2-1 Ordering data of MDS D423 Order number MDS D423 6GT2600-4AA00 Mounting on metal Mounting on metal Direct mounting of the MDS D423 on metal is possible. Figure 3-1 Mounting the MDS D423 on metal MDS D423 C79000-G8976-C319-01, 05/2013... -
Page 3: Field Data
Flush-mounted in metal It is possible to mount the MDS D423 in metal. ≥ 10 mm Figure 3-2 Flush-mounting of MDS D423 in metal Field data Table 4-1 Field data of the MDS D423, mounting on metal Operating distance Limit distance (S... -
Page 4: Technical Specifications
Note Range in a non-metallic environment The MDS D423 is optimized for use in a metallic environment. If the MDS D423 is used in a non-metallic environment, this results in a reduced range. Technical specifications Table 5-1 Technical specifications of MDS D423... -
Page 5: Dimensional Drawing
Dimension drawing for MDS D423 Trademarks All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.