Fizz Creations Slush Puppie Instructions For Use Manual page 24

Using the Machine
4. Remove the Inlet Cap and half fill the Ice
Canister with ice through the Ice/Salt Inlet. This
is indicated by the ICE and SALT marker on the
Canister Lid.
5. Pour 2 inlet caps of salt into the Ice/Salt Inlet.
IMPORTANT
Add salt to the Ice Canister only.
The salt will not be consumed;
it is used to stop the ice mix from
rapidly freezing.
6. Pour 40 ml of water into the Ice Canister through
the Ice/Salt Inlet.
7. Fill the rest of the Ice Canister with ice cubes
through the Ice/Salt Inlet.
Note: The ice level should be at least 3 cm below the
rim of the Ice Canister.
24
– Instructions For Use
SLUSH PUPPiE
®
x2
40 ml