soundsation MHL-60 MKII ZOOM User Manual

Advertisement

Quick Links

W ARRANTY & SERVICE
All
SOUNDSATION
warranty. This two-year warranty is specific to the date of
purchase as shown on your purchase receipt.
The following cases/components are not covered from the
above warranty :
Any accessories supplied with the product
Improper use
Fault due to wear and tear
Any modification of the product effected by the user or a third
party
SOUNDSATION shall satisfy the warranty obligations by
remedying any material or manufacturing faults free of charge at
SOUNDSATION's discretion either by repair or by exchanging
individual parts or the entire appliance. Any defective parts
removed from a product during the course of a warranty claim
shall become the property of SOUNDSATION
While under warranty period, defective products may be returned to your
local SOUNDSATION dealer together with original proof of purchase. To
avoid any damages in transit, please use the original packaging if
available. Alternatively you can send the product to SOUNDSATION
SERVICE CENTER – Via Enzo Ferrari , 10 – 62017 Porto Recanati - Italy .
In order to send a product to service center you need an RMA number.
Shipping charges have to be covered by the owner of the product.
For further information please visit www.soundsationmus
products
feature
a
limited two-year
MHL-60 MKII ZOOM
USER MANUAL
PRO-LIGHTIN
G

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MHL-60 MKII ZOOM and is the answer not in the manual?

Questions and answers

Summary of Contents for soundsation MHL-60 MKII ZOOM

  • Page 1 While under warranty period, defective products may be returned to your USER MANUAL local SOUNDSATION dealer together with original proof of purchase. To avoid any damages in transit, please use the original packaging if available. Alternatively you can send the product to SOUNDSATION SERVICE CENTER –...
  • Page 2 FRENEXPORT SPA – Via Enzo Ferrari, 10 - 62017 Porto Recanati – Italy care! The SOUNDSATION Team © SOUNDSATION 2012 – All rights reserved – All total or partial reproduction of this manual by any other company or person without express authorization of SOUNDSATION is strictly forbidden.
  • Page 3 Net Weight: 3.8kg If any foreign objects enter the instrument, please contact Size: 201.4X196X297MM your dealer or an authorized SOUNDSATION center. The serial number, electrical features and international standards are printed on a label located in the bottom of the instrument.
  • Page 4 Contents Remarks: enter into each menu, please always remember to press ENTER to save settings. Section 1.Getting Started Press ESC button for go back previous menu. Unpacking ² Function Description Safety Instruction ² 0-255 0-540° 0-255 0-220° X 16bit 0-255 Section 2.
  • Page 5 Section 1. Getting Started Option X clockwise and anti-clockwise setting: UP//DOWN to ² Unpacking Pan: Yes choose Yes/No, press ENTER to choose and save. Yes for X MENU4: ² Safety Instruction anti-clockwise running. Option Option Y clockwise and anti-clockwise setting: UP/DOWN to Unpacking (PRESS ENTER) Tilt: Yes...
  • Page 6: Safety Instruction

    Safety Instruction Section 4. Reference ² Control Menu For your safety,please read this user manual carefully before ² DMX Protocol operation. The machine should be operated by qualified engineer! ² Specification Control Menu Ÿ Please conserve this manual as operation guidance. If you sell this product to other user, please make sure that they also receive this user manual.
  • Page 7 Section 3. Troubleshooting Section 2. Set Up ² Installation Probable cause(s) Remedy ² Controlling Board ² Machine Connection No power to fixture Check power cables No response from Primary fuse blown Replace fuse fixture when power Secondary fuse Installation is applies Replace fuse blown This machine should be mounted through the screw holes of truss.
  • Page 8 Controlling Board Cable Connectors Cables must have a male XLR connector on one end and a female XLR connector on the other end. A word on termination: DMX is a resilient communication protocol, however errors still occasionally occur. Termination reduces signal errors, and therefore best practices include use of a terminator in all circumstances.

Table of Contents