Powering Up The Systems - Belkin OmniView SMB F1DP101M User Manual

Hardware Installation
Step 4 Powering Up the Systems
4.1 Attach the power adapter to the IP Device and connect it to a
power source to power up the IP Device. (Refer to diagram below.)
4.2 Power on the KVM switch or server connected to the IP Device. The IP
Device emulates both a mouse and a keyboard on each port, and allows
your KVM switch or server to boot normally.
4.3 Power on all servers connected to your KVM switch.
4.4 Check that the local keyboard, monitor, and mouse are
working normally.
������
������
�����
� ��������
�������
1
2
3
4
5
6
7
8
9
14