Different Ways Of Cleaning - Sonix 4 Ultrasonics SR236 User Manual

NOTE: Do not empty or fill the tank with high-temperature differences as the hot or
cold can damage the machine.

DIFFERENT WAYS OF CLEANING

Gennral Cleaning— use only water to clean under the temperature of about 50℃;
Enhanced Cleaning— add few drops of standard cleaning solutions, liquid soap, or
detergent, or any other non-acidic cleaning agents.
Extensive Cleaning-- removing tarnish, carbon & rust from non-plated metals, it is
recommended to use specific cleaning solution associated with ultrasonic cleaners.
WARNING
: Strong acid or alkaline cleaning solution will cause corrosion, rust and
even puncture of tank or machine body. To solve this problem, please dilute the solution
to mild PH
The cleaning solution will deteriorate in effectiveness over time and use. It is important
to regularly change the fluid and carefully wash the inside of the cleaning tank in order
to preserve the effectiveness and longevity of the cleaner. Do not use corrosive or
abrasive cleaning tools to clean the tank which must be wiped down and dried before it
can be re-connected to the electrical supply.
NOTE: If the machine starts to spark, smoke, smell or displays any other fault the
operator must immediately stop the machine, and isolate it from the electrical supply
and contact the supplier.
6