Download Print this page

Safety Hints - PROAIM LT-262 Instruction Manual

Sunfire led par light + flight case

Advertisement

Safety Hints

ATTENTION: PLEASE READ THIS BEFORE USING TO PREVENT SERIOUS DAMAGE TO
THE GEAR!
This light is intended for indoor use only.
Only qualified and certified personnel should perform installation, not for
household use.
These lights should always be installed/mounted in a stable and secure location.
Always allow adequate ventilation of the light. Never cover or, in any way,
obstruct the louvered openings in light.
Make sure that light is only used in dry location. Do not use light in or around
falling water, wet locations or moisture.
Never look directly into the light source while the fixture is turned on. Light
source is very bright and could cause damage to eyes.
Do not probe or touch any interior features of the fixture. This includes LED
sources inside the barrel of light. Doing so may cause damage to the fixture
and/or may present a shock or burn hazard.
Always make sure that the light fixture is connected to proper power source
with proper voltage and current ratings. Also, make sure that adequate
over-current protection is provided for the circuit as well.
This light contains no-user serviceable parts. Do not open the light housing or
attempt any repair or modification of the light. Failure to observe this warning
could result in damage to the light, injury and/or voiding the limited warranty.
Inserting objects or fingers inside any openings or connectors could result in a
shock hazard/injury and damage to the light.
FOLLOWING THESE GUIDELINES WILL PROVIDE BETTER IMAGES AND TROUBLE FREE
OPERATION.
SHOULD YOU NEED ADDITIONAL INFORMATION, TECHNICAL ASSISTANCE IS
AVAILABLE 'ONLINE' BY CONTACTING YOUR SALES REPRESENTATIVE.
5

Advertisement

loading