TEI FDC-3 User Manual page 25

Floppy-disk controller
Table of Contents

Advertisement

A.3.2.4
Status ::
lQ
The "10" error occurs if the drive or controller cannot find the
program-selected tracklsector combination.
Typing "R" causes
TIDOS
to Retry the oI/eration four times. If the
error recurs, try pressing R again.
If the error does not go away
after several retries, refer to Section VI.
A.3.2.S
Status ::
.o..a
The "08" error occurs if CRC (Section 3.6.7) does not check on a data
field.
Recovery from status 08 messages mayor n,ay not be possible.
With an
Word Processing Program in operation, try the Save procedure, then
retry the file.
If the error recurs, go to the backup file.
If a backup file is not available, typing "R" causes
TIDOS
to Retry
the operation four times.
If the error recurs, try pressing Ragain.
If the error does not go away after several retries, press RETURN.
TIDOS
now ignores the error; however several er.rors in the same
sector may cause the BDOS ERROR ON BAD SECTOR message to appear.
1ft h e err
0
r is a d a t a err
0
r, s
0
r:l
e
0
raIl the near by t ext
I
d a tam a y be
lost. Transfer as much data as possible to another diskette, and
discard the original diskette.
If the error is a
disk-formatti~g
error, data may be intact.
Transfer as much as possible to another
diskette, reformat the original diskette, and try using it again.
A.3.2.6
Status::
.QA
The "04" message occurs if data lost because the CPU did not transfer
it in time.
Refer to Section VI.
A-S

Advertisement

Table of Contents
loading

Table of Contents