Advertisement
Quick Links
OPERATING
INSTRUCTIONS
FOR:
MODEL: TGO-80W, 150W, 240W
GLASSWARE DRYING OVEN
Thermoline Scientific Equipment Pty. Ltd.
ABN 80 000 859 129
10-12 Ross Place Wetherill Park NSW 2164. P.O. Box 1851 Wetherill Park DC NSW 1851
Phone: (02) 9604 3911
International: 61 2 9604 3911
Fax:
(02) 9725 1706
International: 61 2 9725 1706
Email:
thermoline@thermoline.com.au
Web:
www.thermoline.com.au
Advertisement
Related Manuals for Thermoline Scientific Equipment TGO-80W
Summary of Contents for Thermoline Scientific Equipment TGO-80W
- Page 1 OPERATING INSTRUCTIONS FOR: MODEL: TGO-80W, 150W, 240W GLASSWARE DRYING OVEN Thermoline Scientific Equipment Pty. Ltd. ABN 80 000 859 129 10-12 Ross Place Wetherill Park NSW 2164. P.O. Box 1851 Wetherill Park DC NSW 1851 Phone: (02) 9604 3911 International: 61 2 9604 3911...
- Page 2 Models TGO-80W, 150W, 240W Glassware Drying Oven Manual Introduction: Thank you for selecting this equipment from the large range of products manufactured & imported by Thermoline Scientific. This manual covers the operation, cleaning, & maintenance instructions for this equipment. Incorrect operation or use can cause harm or damage to the equipment, therefore it is very important that you read, understand, and implement the instructions, to ensure reliable operation.
- Page 3 The TGO-80W and the TGO-150W are suitable for bench mounting, but the larger TGO-240W is meant to be free standing. Model:...
- Page 4 Models TGO-80W, 150W, 240W Glassware Drying Oven Manual Power switch: This illuminated switch is used to turn on the temperature controls and the circulating fan. “0” is power off and “1” is power on. Temperature control: PV (process variable): This digital display is the actual temperature in the oven.
- Page 5 Models TGO-80W, 150W, 240W Glassware Drying Oven Manual High Temp Safety Thermostat: Located on the front control panel, this thermostat is set by the operator to turn off the heating element, should the temperature control fail in an “on” state. There is indicating light adjacent to the thermostat to indicate when the thermostat is tripped.
- Page 6 Models TGO-80W, 150W, 240W Glassware Drying Oven Manual • Press the button again to view the timer display. The duration timer will turn off the heating after the set time has lapsed. The display is in hours and minutes and is shown below set at 10 hours, 00 minutes.
- Page 7 Models TGO-80W, 150W, 240W Glassware Drying Oven Manual a) Turn the thermostat knob fully clockwise and allow time for the oven to stabilize at the highest set temperature. b) Once the temperature is stable the over temperature thermostat can be adjusted.
- Page 8 Models TGO-80W, 150W, 240W Glassware Drying Oven Manual CLEANING: General cleaning: The interior liner and exterior case can be cleaned using a soft cloth. Never use abrasive cleaners or scouring pads as these will scratch the surface and may result in corrosion.
- Page 9 Models TGO-80W, 150W, 240W Glassware Drying Oven Manual AL-2 3.0ºC AT.BS 100.0 LOCK • “BS” is used to adjust the PV value to make it read the true value when measured by a calibrated independent instrument. For example, if the “PV” display reads 100.0ºC and a calibrated instrument measured the oven temperature at 100.5ºC;...
- Page 10 Glassware Drying Oven Manual Standard 12 month Warranty Thermoline Scientific Equipment Pty Ltd ABN 80 000 859 129 (“Thermoline”) Thermoline warrants to the original purchaser that this product will perform to its product specification for a period of 12 months from date of purchase, provided that the installation of the product has been carried out in accordance with the latest version of the manufacturer's instructions and further provided that the use of the product complies with that specified in the relevant specification.
Need help?
Do you have a question about the TGO-80W and is the answer not in the manual?
Questions and answers