Kenwood DMX7018DABS Instruction Manual page 51

Ñ
ISO Connector function guide
Pin Color and function
A-4 Yellow
A-5 Blue/White [1]
A-6 Orange/White
A-7 Red
A-8 Black
B-1/ B-2 Purple (+) /
Purple/Black (–)
B-3/ B-4 Gray (+) /
Gray/Black (–)
B-5/ B-6 White (+) /
White/Black (–)
B-7/ B-8 Green (+) /
(–)
Green/Black
[1] Max. 300mA, 12V
• Speaker Impedance: 4-8 Ω
!
CAUTION
Before you connect the commercially
available ISO connectors to the unit, check the
following condition:
• Make sure that the pin assignment of the
connector matches with the KENWOOD unit.
• Take extra notice of the power wire.
• In case battery wire and ignition wire are not
corresponding then change them accordingly.
• In case the car does not have an ignition wire,
use a commercially available interface.
Battery
Power Control
Illumination
Ignition (ACC)
Earth (Ground)
Connection
Rear Right
Front Right
Front Left
Rear Left
Ñ
Connecting an iPod/iPhone/
Android
Micro USB to USB
cable [2]
KCA-iP103 (0.8m)
[3]
USB terminal
Cap
[1] iPod/iPhone maximum power supply current :
DC 5 V = 1.5 A
Sold separately
[2]
Optional accessory
[3]
Connection/Installation
Android smartphone [2]
iPod/iPhone
[2]
Lightning connector
(0.8 m)
[1]
5V = 1.5A
M4x6
REAR OUT FRONT OUT AV IN
L
R
ANT
CAM IN VIDEO OUT VIDEO IN
English
51