3Com LANplex 6000 Installation Manual page 9

LMM in slot 1
TRSM
Figure 6 Guiding an TRSM Module into a LANplex 6004
6 Inject the TRSM into the chassis.
If the system is powered on, when the Power/Unseat LED on the
panel's faceplate is yellow, inject the TRSM into the chassis by grabbing
both ejector/injector handles and simultaneously push them inward. See
Figure 7.
If the system is not powered on, once you feel a slight resistance, inject
the TRSM into the chassis.
7 Relocate the inject handles back to their center position by gently pushing
them inward. See Figure 7.
This locks the TRSM into the chassis. The Power/Unseat LED lights green
when the TRSM is seated.
TRSM Installation
9