Disposal - Silvercrest KH 2155 Operating Manual

The remote control does not change the station on the
device.
> Press the corresponding device button
control to the correct mode.
> In the event that the original RC does not have a "-/--"
button, change the programme with the CH+/— buttons y
or the number buttons.
> If this also does not work the child protection for this
device could be activated.
Some of the remote control buttons do not function
properly.
> It is possible that your universal remote control does not
have all of the functions that are on the device's original
remote control.
> It is possible that you have not programmed in the optimal
code. Search for a code that supports more of the target
device's functions.
The remote control stops reacting after a button is
pressed.
> The batteries must have enough voltage and be properly
installed.
> Point the remote control towards your device.
The LCD display shows nothing.
> The batteries must have enough voltage and be properly
installed.
> The contrast could be set too low. Then increase the
contrast setting.

disposal

Do not dispose of the device in your normal
domestic waste. This product is subject to the
European directive 2002/96/EC.
Universal remote control
• Have the universal remote control or parts of it disposed
of by a professional disposal company or by your com-
munal disposal facility.
• Observe the currently applicable regulations. In case
of doubt contact your disposal facility.
- 26 -
r to set the remote