Alternative Button Allocation In Pip Mode; Faults / Remedies - Silvercrest KH 2155 Operating Manual

Alternative button allocation in PIP mode

Note:
The PIP function (picture in picture) is only available in the
TV mode. Your TV device must support this function.
You switch the PIP function on and/or off with the PIP button.
If the remote control is in the PIP mode the following buttons
serve as controllers for the PIP functions:
Button

Faults / Remedies

Your device does not react to the remote control.
> Check the batteries. They must have enough voltage and
be properly installed.
> Firstly have you pressed the correct device button
the desired target device?
> Check to see that the correct code is programmed in for
the target device (see section "Programming the remote
control").
The remote control is transmitting the commands in-
correctly.
> Press the corresponding device button to set the remote
control to the correct mode.
> The batteries must have enough voltage and be properly
installed.
> It is possible that you are using the wrong code. Start the
brand code search, the automatic code search or the
direct code input (manual).
Normal function
move up in the
menu
move down in the
menu
switch to AV
move left in the
menu
move right in the
menu
Function in PIP mode
- 25 -
PIP +
PIP —
PIP source
PIP size
PIP position
r for