Table of Contents
Advertisement
Technical Data
Output power:
THD+N:
SNR (A-weighted):
Frequency Response: 20Hz-20kHz (@-3dB, @10mW)
Inputs:
Outputs:
PCM Support:
Accessories:
Service
Should you encounter a problem which you are not able to alleviate or identify despite the above information,
please contact your dealer for further advice. Only if the problem cannot be resolved there, the unit should be
sent to the responsible distributor in your country.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modifications or changes to any part of the product by unauthorized persons release the
manufacturer from any liability over and above the lawful rights of the customer.
Copyright
Pro-Ject Audio Systems is a registered trademark of H.
Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems
Copyright
2018. All rights reserved.
©
© Pro-Ject Audio Systems · Pro-Ject DAC Box E mobile· Revision 2018.18.10
>27mW (in 32Ohm, @THD<0,1%)
<0,01% (@10mW, 32Ohm)
>110dB, max output
1x USB C (USB 2.0)
1x 3.5mm (Stereo)
32bit/192kHz
1x USB C to OTG micro USB B cable
The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.
3
Advertisement
Table of Contents
Need help?
Do you have a question about the DAC Box E mobile and is the answer not in the manual?
Questions and answers