Fountainhead OML-1 Owner's Manual

The Fountainhead Group
Compressed Air Sprayer
If you have any problems with, or have any questions about your sprayer,
RETURN IT TO THE STORE, CALL OUR TOLL FREE CUSTOMER SERVICE CENTER AT:
WARNING!
The sprayer is operated with liquid under pressure. Failure to observe CAUTION and to follow instructions for operating and cl
can cause tank, hose and other parts to be weakened and/or rupture under pressure. This can result in SERIOUS INJURY from high
or forcible ejection of parts. DO NOT USE FLAMMABLE MATERIALS IN THIS SPRAYER. Material could ignite or explode, causing seri
OF THIS PRODUCT - YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USE.

SAFETY PRECAUTIONS:

1. Read owner's manual completely before
operating this sprayer.
2. This sprayer is designed for light duty lawn and
garden use only.
3. Always use goggles, gloves and protective
clothing when using sprayer.
4. Read and follow all instructions and cautions on
label of products used in this sprayer.
!
IMPORTANT
1 1 1 1 1
1 1 1 1 1
1. PUSH HOSE COMPLETELY ON.

ASSEMBLY INSTRUCTIONS

HOSE ASSEMBLY TO TANK:
IMPORTANT: Two
identical
hose nuts are required for proper assembly of the sprayer.
to heat, or alter hose, hose nut, or barb
1.
Slide hose nut over end of hose (observe proper hose nut
orientation in above diagram). Push hose completely onto tank
barb, as shown in step #1 of above diagram.
2.
Slide hose nut along hose and over barb threads. Turn hose nut
clockwise to completely tighten over hose, as shown in step #2 of
above diagram (do not use tools).
HOSE ASSEMBLY TO SHUT-OFF:
Repeat steps #1 and #2 above, while connecting hose to barb of shut-off.
IMPORTANT:
1.
It is recommended to
spraying chemicals.
proper eye protection while testing.
water test, call our customer service center before using sprayer
with chemicals.
2.
Make sure hose is not cracked or frayed and does not show signs of
swelling. Make sure the hose is securely connected to sprayer.
OPERATING INSTRUCTIONS ARE CONTINUED ON NEXT PAGE
E-mail: Info@TheFGI.com • Web site: www.TheFountainheadGroup.com
1-800-311-9903
1-800-311-9903
5. Spray when air is calm to prevent drift of
chemical.
6. Do not leave sprayer in the sun when not in
use.
7. Never use flammable liquids, caustics, acids
or hot water in this tank.
8. Never store chemicals in this tank.
9. Always release pressure when sprayer is not in
use and before removing pump from tank.
HOSE ASSEMBLY INSTRUCTIONS
NEVER USE SPRAYER WITHOUT NUT.
hose nuts are included in the parts kit. Both
prior to assembly.
test sprayer using plain tap water before
Test all connections for possible leaks. Use
If sprayer does not pass the
Models OML-1, RML-1, GGS-1, SML-1, SML-2
TEST SPRA YER WITH W
2 2 2 2 2
2. TIGHTEN NUT COMPLETELY.
Do not attempt
EXTENSION
Owner's Manual
BEFORE YOU
pressure discharge of liquids
ous injury. FOR SAFE USE
ATER BEFORE USING ANY
10. Never stand with face or body over sprayer when
pressurizing tank or releasing pressure.
11. Clean and rinse sprayer thoroughly after each use.
12. Never attempt to alter sprayer from original
condition.
13. Always use replacement parts from original
manufacturer.
IMPORTANT
BARB
CONNECTION
SHUT-OFF
eaning
CHEMICALS.
!
PUMP HANDLE
SHUT-OFF
LOCK
BARB
CONNECTION
TANK
NOZZLE