Advertisement

This trainer is for intermediate to advanced cyclists only.
If you are unfamiliar with proper training technique, please
seek professional guidance.
Use only on a flat and level surface. Make sure the
underside of the drums does not contact the ground,
carpet, etc.
Do not use in dusty or dirty conditions
Your roller drums are precision lathe-turned for a smooth
ride. Protect the drums from damage during use, handling
and storage.
Always wipe the trainer down after use to avoid corrosion.
Use a damp cloth only; do not use any cleaners.
The bearings are permanently lubricated and sealed, and they
do not require maintenance.
Make sure all fasteners are snug, but do not overtighten.
SportCrafters warrants all products to be free of any and all defects in
material or workmanship. This warranty does not apply to parts that
have excessive wear due to normal use, misuse, neglect, accident, or
acts of God. Where applicable, incidental and consequential
damages are not covered, and there are no other warranties,
expressed or implied. This warranty applies to the original owner, and
is valid for a lifetime.
Please retain your receipt as proof of purchase.
In the event of a warranty, please contact us at
info@sportcrafters.com, or call 574-243-2453.
51345 Bittersweet Road
Granger, Indiana 46530 USA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Omnium and is the answer not in the manual?

Questions and answers

Summary of Contents for SportCrafters Omnium

  • Page 1  Make sure all fasteners are snug, but do not overtighten. SportCrafters warrants all products to be free of any and all defects in material or workmanship. This warranty does not apply to parts that have excessive wear due to normal use, misuse, neglect, accident, or acts of God.
  • Page 2 This can occur if the dropouts are not aligned properly or seated all the way on the Omnium fork stand: mount tube. Check again that the bike is vertical and the rear wheel tracks...

Table of Contents