Wall Mounting With Gang Box - Vezco VZ-IP-INTPRO Quick Start Manual

3.1.2 Wall Mounting with Gang Box

Steps:
1. Chisel a hole in the wall for inserting the gang box. The size of the hole should be
larger than that of the gang box. The suggested size of hole is 343.5 (length) × 113.5
(width) × 55.5 (depth) mm.
2. Insert the gang box into the hole and fix it with 4 PA4 screws.
3. Make sure the edges of the gang box align to the wall.
4. Route the cables of the door station through the cable hole.
Video Intercom Door Station·Quick Start Guide
Figure 3-2 Insert the Gang Box into the Wall
Screw
Screw
12