Terminal S1 is set as default for connecting exit button.
2.2.4 External Card Reader Wiring
Please set the DIP switch first before connecting the card reader.
If the DIP switch should be configured when the card reader is power-on, please
reboot the card reader after configuring the DIP switch.
The DIP switch description is shown in the following table:
No.
1-4
6
7
RS-485 Card Reader Wiring
Video Intercom Door Station·Quick Start Guide
Description
Set the RS-485 address
Select Wiegand protocol
or RS-485 protocol
Set the Wiegand protocol
(It is invalid when setting
OFF in 6.)
Figure 2-5 RS-485 Card Reader Wiring
How to Configure
ON: 1
OFF: 0
ON: Wiegand
OFF: RS-485
ON: Wiegand 26
OFF: Wiegand 34
8